SCSI - SATA RAID Array
Proware SB-2803SA 2U/8 bays
Proware 8 disk bays rackmount SATA RAID with Ultra 320 SCSI interface, provides hard disk, fan and PSU fault tolerance within a small 2U package.
Features
|
|
 |
Supports hot spare and automatic hot rebuildHost-to-Drive Interface |
Configuration |
Model |
Form Factor |
SCSI-320 to SATA-II |
Dual hosts |
SB-2803SA |
2u |
RAID Management
- Smart-function LCD display
- Environmental monitoring unit
- Real time drive activity and status indicators
- Browser-based Java GUI management utility
RAID Function
- New disk auto spare
- Host independent
- Environment monitor
- Online expansion
- Continuous rebuild
- Online consistency check
- Failed drive auto rebuild
- Failed drive indicators
- Audible alarm
- Password protection
- E-mail notification
- UPS connection
- Bad block auto-remapping
- Array Roaming
- SNMP Protocol Support
- Multiple RAID selection
- Online RAID level migration
- Background RAID initialization
- S.M.A.R.T.
Specifications
Model |
SB-2803SA |
Form-factor |
2U 19-inch rackmount chassis |
RAID processor |
Intel 80321 64bit RISC |
RAID Level |
0,1,3,5,0+1,6,JBOD |
Cache memory |
128MB ~ 1024MB |
No. of channels (host+drive) |
2 + 8 |
Host bus interface |
Ultra 320 LVD |
Drive bus interface |
SATA II |
Data transfer rate |
Up to 320MB/Sec |
Back plane board |
SATA II |
Hot-swap drive trays |
Eight (8) 1-inch trays |
Power supply |
300W x 2 power supplies w/PFC |
Cooling fans |
2 |
Power requirements |
AC 95V ~ 264V Full range 6A / 3A, at 115V / 230V, 47Hz~63Hz |
Environmental |
|
Relative Humidity: |
10% ~ 85% Non-condensing |
Operating Temp: |
10°C ~ 50°C (50°F ~ 122°F) |
Physical Dimensions: |
88(H) x 482(W) x 650(D)mm 3.46(H) x 18.98(W) x 25.59(D)inches |
Weight |
13.5kgs / 29.7Lbs (without drives) |
