Proware SB-3163S-F4S3 Fibre - SAS RAID Array

3U/16 bays, SAS - SAS, 4Gb Fibre - SAS / SATA RAID Array Subsystem

Fibre channel - SAS RAID

Datasheet

Features
- Supports RAID levels 0, 1, 0+1, 3, 5, 6, 30, 50, 60 and JBOD
- Supports online Array roaming
- Online RAID level/stripe size migration
- Online capacity expansion and RAID level migration simultaneously
- Online Volume Set Expansion
- Supports multiple array enclosures per host connection
- Supports greater than 2TB per volume set (64-bit LBA support)
- Supports 4K bytes/sector for Windows up to 16TB per volume set
- Supports up to 128 LUNs per RAID set
- Transparent data protection for all popular operating systems
- RAID ADG provides the highest level of data protection
- Instant availability and background initialization
- Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives
- Local audible event notification alarm.
- Supports password protection and UPS connection
- Serial port interface for remote event notification
- Redundant flash image for high availability

Specification

Model
SB-3163S-S3S3
SB-3163S-F4S3
Form-factor
3U 19-inch rackmount chassis
RAID Controller
Intel IOP341 64-bit
RAID level
0,1,0+1,3,5,6,30,50,60 and JBOD
Cache memory
512MB ~ 2GB DDR2 SDRAM
Host bus interface
Two 4x Mini SAS (3Gb/s)
FC-AL (4 Gb/s) per port
Drive bus interface
SAS or 3Gb/s SATA II
Data transfer rate
Up to 300MB/sec per channel
Up to 400MB/sec per channel
Expansion
One 4x mini SAS (SFF-8088)
Controller Redundancy
Option
Hot-swap drive trays
Sixteen (16) 1-inch trays
Online capacity expansion, RAID level / stripe size migration
YES
Online Volume sets expansion
YES
Online Array roaming
YES
Online consistency check
YES
SMTP manager and SNMP agent
YES
E-mail Notification
YES
Redundant Flash image
YES
R-Link support
YES
Support over 2TB per volume
YES
Instant availability and background initialization
YES
S.M.A.R.T. support
YES
New disk insertion / removal detection
YES
Failed drive auto rebuild
YES
Continuous rebuild
YES
Multiple RAID selection
YES
Bad block auto-remapping
YES
Audible alarm
YES
Password protection
YES
UPS connection
YES
SES2 enclosure management
YES
Hot-swap power supplies
YES
Cooling fans
4
Battery backup
Option
Power supplies
Two(2) 460W power supplies w/PFC
Power requirements
AC 90V ~ 264V Full Range 8A ~ 4A, 47Hz ~ 63Hz
Environmental
Relative Humidity
10% ~ 85% Non-condensing
Operating Temp
10oC ~ 40oC (50oF ~ 104oF)
Physical Dimension
133(H) x 482(W) x 600(D)mm
Weight (Without Disk)
24.7kgs/54.34Lbs