3U/16 bays, 4Gb/s Fibre to SATA II RAID 6 subsystem
 |
 |
Features
- Supports RAID levels 0, 1, 0+1, 3, 5, 6 and JBOD
- Supports hot spare and automatic hot rebuild
- Allows online capacity expansion within the enclosure
- Local audible event notification alarm
- Supports password protection and UPS connection
- Built-in serial port interface / or Ethernet for remote event notification
- Dual host channels support clustering technology
- Tagged command queuing for 256 commands, allows for overlapping data streams
- Transparent data protection for all popular operating systems
- RAID ADG provides the highest level of data protection
- Supports multiple array enclosures per host connection
- Instant availability and background initialization
- Supports greater than 2TB per volume set (64-bit LBA support)
- Supports 4K bytes/sector for Windows up to 16TB per volume set
- Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives
- Supports online Array roaming
- Online RAID level/stripe size migration
- Online capacity expansion and RAID level migration simultaneously
- Online Volume Set Expansion
Exceptional Manageability
- The firmware-embedded Web Browser-based RAID manager allows local or remote management and configuration
- The firmware-embedded SMTP manager monitors all system events and user notification automatically
- The firmware-embedded SNMP agent allows remote to monitor events via LAN with no SNMP agent required
- Menu-driven front panel display
- Innovative Modular architecture
RAID Function
- New disk auto spare
- Host independent
- Environment monitor
- Online expansion
- Continuous rebuild
- Online consistency check
- Failed drive auto rebuild
- Failed drive indicators
- Audible alarm
- Password protection
- E-mail notification
- UPS connection
- Bad block auto-remapping
- Array Roaming
- SNMP Protocol Support
- Multiple RAID selection
- Online RAID level migration
- Background RAID initialization
- S.M.A.R.T.
Specification
| Model | SB-3163E-F4A3 |
| Form-factor | 3U 19-inch rackmount chassis |
| RAID processor | PowerPC 440SP |
| RAID Level | 0,1,3,5,0+1,6,JBOD |
| Cache memory | 512MB ~ 4G |
| No. of channels (host+drive) | 2 + 16 |
| Host bus interface | FC-AL (4 Gb/s) |
| Drive bus interface | SATA II |
| Data transfer rate | Up to 400MB/Sec |
| Back plane board | SATA II |
| Hot-swap drive trays | Sixteen (16) 1-inch trays |
| Hot-swap power supplies | Two (2) 60W power supplies w/PFC |
| Cooling fans | 4 |
| Battery backup | Option |
| Power requirements | AC 90V ~ 264V Full Range 8A ~ 4A, 47Hz ~63Hz |
| Environmental | |
| Relative Humidity: | 10% ~ 85% Non-condensing |
| Operating Temp: | 10°C ~ 40°C (50°F ~ 104°F) |
| Physical Dimensions: | 133(H) x 482(W) x 600(D)mm 5.24(H) x 18.98(W) x 23.62(D)inches |
| Weight | 20.5kgs / 45.1Lbs (without drives) |
